HI, I'm working with Officina Stellare for designing an improved CCD camera adapter for the RH-200 veloce telescope. For this purpose, i need a mechanical diagram of the front plate on top of the OAG-8300. I looked at SBIG OAG-8300manual but there was no information on this respect. Who at diffraction limited can provide me this mechanical diagram? Robert
There are three plates available. T-thread vignettes on the OAG, so that leaves two. Which one are you interested in? http://diffractionlimited.com/product/adapter-plate-2-156-x-24-thread/ http://diffractionlimited.com/product/adapter-plate-2-x-24-thread/
Hi Doug, Because of the backfocus restriction i need 2 things: a)- The STF8300 CCD -CFW8300-OAG8300 WITHOUT the top plate (attached with 4 screws) distance. My measurememt estimate is 56mm. Do you have this data on your web site? b)- I need to remove the OAG-8300 top plate and put Officina's new design low profile adapter plate at the design stage. In other words, i need a mechanical drawing telling where are the 4 drilled holes on your 2-156x24 plate model as well as its tickness and and overall dimensions. Regards, Robert