They are baked and sealed at the factory.
Yes, we're almost ready to roll. We're about to launch a new web site; the Aluma AC455 page will go up at the same time.
Nothing official... at the very least we'll hop in the car and drive down to Kingston.
You will have to build something custom. Please note there is a risk of damaging your camera and your computer if you wire it incorrectly. The...
Camera pinouts and recommended connectors are included in the user manual for the cameras. Those can be downloaded from the relevant product page...
Very nice!
@Tim will help you with that. As this is an older camera, you also have the option of sending it to Bill Lynch at SBIG Service & Repair. He is...
I'm currently travelling and will be back on Tuesday.
I can't say I recommend taking it to a camera shop. They won't be used to working with a sealed chamber. If you or someone else does open the...
I went through a quick analysis of the HG dataset last night using MaxIm DL and Excel. [ATTACH]
Also bugs are generally nonconductive, so they're not going to short out the circuit board. If there's bug gunk in there you might want to blow...
The camera does not measure the fan voltage. The status LED on the camera's front panel gives a rough indication of input voltage level. Green...
You should be able to use compressed air.
I reviewed the firmware code, and as far as I can tell the code cannot turn off the fan. (The hardware could... but the firmware doesn't do it.)
The converter subsystem in CMOS sensors is of course entirely built into the sensor itself. Gpixel's sensor specifications are as follows: 1.4X...
This is available in our Backfocus Calculator spreadsheet: https://diffractionlimited.com/downloads/BackfocusCalculator.xlsx
Yes, the STC-428-P includes a built-in filter wheel. No, you can't order the STC-428-P with an AFW wheel; instead you would need to purchase...
I would normally recommend leaving the camera powered, with the cooler turned off, and disconnected from the software. That keeps a little heat...
It may have been hot plugged. There are fuses in the camera that can be blown if you do that. @Bill can probably fix that.
The manual is on the Legacy Product Support page, https://diffractionlimited.com/legacy-product-support/ Also of interest:...
Separate names with a comma.