Colin, It works. Is this config change permanent? Eg if I set fan speed to 100%, it will take effect until I make another change, or I need to...
I tried Mac OSx CCDOpe Lite, the fan runs continuously and cooling is working ( I am not sure if cooling number makes sense, 40% for -40C below...
I did try to connect all pins and nothing has changed. When cooling is turn on, fan stops and cooling % goes up quickly and drops back to 0, I...
Does STXL16200 have same design as STX16803? I replaced with exactly the same fan, but fan stops spinning a few seconds after cooling starts. It...
That is probably be true, but I think the design should always be considerate, rather than hoping it wont show up. I wish there will be more...
My observation is that the vibration is mostly absorbed by camera body when the fan is mounted, but you can still feel it. So it may or may not be...
New fan link: https://noctua.at/en/products/fan/nf-a6x25-flx
Of course, the new fan has less air flow.
Colin, I believe I have vibration issue with both my 16803 and 16200, stars are elongated near top down. I am using the fan mentioned in this...
Replaced my 16803 , tested and got -45C cooling capability.
Great! And for wire connection, shall I leave yellow wire open?
Doug, What is the name of this connector? Do you have link to Digiley? I want to replace my 16200 fan too. For 3 pin fan (red/black/yellow),...
1. Wiring problem inside MyT would require no auto guider cable plugging into instrument panel port 2. Bent pin in MyT instrument panel port or...
Colin, If star drifts West, that means the mount tracks too slow, in another word, mount gets stalled when not supposed to. So it it means that...
My question remains as it will help me debug issue. What does drifting west mean on guide port? Is it +RA or -RA, is is pulse signal active high...
ASCOM guiding is working fine. I am trying guide port to make sure everything is working properly, some real issue might be hidden behind it.
Or another question. Do you think this can be caused by STX guider ASCOM driver? The driver comes from SGPro.
Doug, What does drifting west mean on guide port? Is it +RA or -RA, is is pulse signal active high or active low? Paramount user manual states...
[ATTACH] When star drifts West (ie, mount tracks slower than sidereal), does it mean pin 1 is "high" continuously? or pin4?
No cable no drift. But I can not figure out where it is from. Could it be from guide port of STX16803, or maybe cross talk of the guide cable?
Separate names with a comma.