I don't use TSX in this manner but I would certainly check to make sure the settings are saved after making any changes, disconnect, then restart...
This camera is mounted to a 24" RC at SRO and nearing completion of setup for remote use. As I've used SBIG cameras from the ST-7, ST-8E,...
It may be obvious at this point that my experience with the STL-11000 and STX-16803 not to mention ST7, ST8, ST10 and so on aren't helping me here...
Thanks Doug. Last night while trying to do some mapping I had it set to -5 which seemed to do well and used auto dark. I didn't look to see what...
Thanks Colin. By time I was making any real progress the clouds had moved in and the roof closed (wasn't connected to SRO weather). Bottom line...
One last question, and you've been very patient with me, what is a reasonable cooling set point for this camera? With mys STL-11000 and STX-16803...
OK I think that part is cleared up. Next question is does the image display always show the image and a identical black square below it normally?
I'm guessing that dual chip mode is unchecked right?
[ATTACH] [ATTACH] I'm reasonably sure I had it set this way last night. Changing the setup sometimes resulted in program errors and shutdowns....
This camera was sent out to SRO to be installed on the new 24" RC. Last night was the 1st cleat nite I've had in months it seems to do some...
Is anyone familiar with ASA’s hub control app, ASA ACC? If so please send me a private email. Issues with trying to remotely (SRO) setting up an...
Thanks Colin, I was working through the manual and trying to see in my mind how things were connected and getting very confused. The FTD USB...
Update, seems there was a FTD USB driver issue blocking the AC4040 from connecting although the guider had no issues.....go figure. It was hidden...
As of now I can only get the guide sensor (Star Chase) connected. Looking at Device Manager and I get the attached report for the SBIG Drivers....
Now that the new camera is mounted and ready for use at SRO I find I can't make a connection to the cameras. This setup has the BSI camera,...
From what I've been able to tell from 3K miles away is that the Star Chaser is powered as is evident in the screen capture w/ the 4.8 sized...
Well the camera is mounted and ready for use I'm told at SRO but getting the connection is not going well. Seems I can connect to the main chip...
Thanks guys. The issue was simpler than I had thought. It wasn't a guider issue but rather a polar alignment one. What eludes me, and that's not...
I'm using my trusty STL-11000 on my new Mach 2 mount and tried using ASCOM Direct to eliminate another cable. Having some issues and wanted to...
So now that the system has changed somewhat I'm trying to see if I can get designed back focus as near as possible. John tells me I have 9-3/8 to...
Separate names with a comma.