Staff Assigned: Tim 10Micron does not center

Discussion in 'Demo User Tech Support' started by Martin Rrichter, Sep 16, 2018.

  1. Martin Rrichter

    Martin Rrichter Standard User

    Joined:
    Sep 16, 2018
    Messages:
    1
    Hi ,
    I´m using the demo version of Maxim DL 6 with a GM300 HSP mount. When I try to center an image (right click and point scope to here) Maxim does not center the telescope .
    I can plate solve with pin point (light) and the results look okb, however I cannot bring the object into the middle of the screen, The mount is slewing in the wrong direction. The plate factor from the solver is the same compared with the online tool from Astrometry net.
    questions:
    # can you provide a list of setting for the 10 micro mount (Ascom Driver is vers. 1.31.0, connected via ethernet)
    os is win 10
    # since my demo version expires in 3 days could you give me another few days to to get Maxim dl up and
    running?

    Thanks for your Help in advance
     
  2. Tim

    Tim Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    1,505
    Are you able to control the mount from within MaxIm DL?

    Have you set the mount type, and side of pier parameters for your specific mount? These are on the Setup tab of the Observatory Control Window.

    Sorry, we do not have information, or settings for specific mounts.

    Yes, I will send you a PM with a one-time 30-day demo extension shortly.
     

Share This Page