BACKFOCUS for SBIG STL1000M

Discussion in 'STF Series CCD Cameras' started by artem, Oct 3, 2016.

  1. artem

    artem Guest

    Good afternoon from Vienna,

    What is the correct BACK-FOCUS for the SBIG STL 1100M ( the OPTICAL BF ) ?
    with the accessory mounting surface in with Filters?

    Can someone give me advice ? please....
    since when I google, I find details like (Backfocus, Approximately 1.7 inches (~4.3 cm)) but when I convert the values inserted in the document attached, I get another result which are not the same with 4.3cm..




    Thank you

    Martin
     

    Attached Files:

  2. Tim Puckett

    Tim Puckett Guest

    STL11k.png


    This should help you, the first line is the camera only...
     
  3. artem

    artem Guest

    Thank you Tim,

    The value 1.470 with OPTICAL FOCUS W/3 MM FILTERS (-.039"), is that in inch ?? since that would mean, the optical BF is then 37338mm
    is that true ?

    And do I need to add any value / distance for the accessory mounting surface ?

    Thank you

    Martin
     
  4. Tim Puckett

    Tim Puckett Guest

    It's listed in inches.
    "1.470 inches is for the camera only.
    If you need drawings or further info email me
    Regards
    Tim
     
  5. artem

    artem Guest

    Thank you Tim,

    I will do so, I need to order the adapters, hence ! I need to know which ones I need to order..

    Will ctc you via email

    Thank you

    Martin
     
  6. artem

    artem Guest

    Hello,

    Did send an email, bit since 3 days no answer, I need to know please also the dimensions or THICKNESS for the accessory mounting surface for the STL1100 !

    Is there any data for this also ?

    Thank you

    Martin
     
  7. Tim Puckett

    Tim Puckett Guest

    Hi Martin,

    I had sent you drawings as well the other day.
    I will resend the message with a download link.

    Regards
    Tim
     
  8. Tim Puckett

    Tim Puckett Guest

    Hi Martin,
    I sent a test email this morning to you.

    I resent just now one of the drawings. Let me know if these came though today or call me.
    Thanks
    Tim
     
  9. artem

    artem Guest

    Thank you Tim, for your email and drwaings..

    I guess ! I know which Adapter and Adapter lenghth I Need to be Focus..

    Regards

    Martin
     

Share This Page