Camera gain switches to High and sticks

Discussion in 'Image Capture' started by RonC, Dec 11, 2015.

  1. RonC

    RonC Cyanogen Customer

    Joined:
    Dec 6, 2015
    Messages:
    23
    With my QSI 583 and older Maxim 4.61 if camera gain was set to "auto" the setting stayed and the action during data acquisition was dictated by the QSI driver - bin = 1x1 gain was high (0.5) and for binning 2x2 gain was low (1.1). Now in Maxim 6.11 when I set gain to auto and acquire a 1x1 binning sub frame gain toggles to high and remains for the entire session. It would seem to me this defeats completely the ability to obtain low gain sub frames in automation!

    Does anyone know of a fix?

    Best to all,
    Ron
     
  2. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    5,603
    You'll have to talk to QSI - this is all internal to their drivers and/or camera.
     

Share This Page