Stacking snafu

Discussion in 'General' started by Geoff Hughes, Jun 20, 2019.

  1. Geoff Hughes

    Geoff Hughes Cyanogen Customer

    Joined:
    Nov 13, 2015
    Messages:
    53
    I went through all the steps for stacking my images but stacking failed. I'm attaching a screen shot of the file folders and the log that resulted. What am I doing wrong?
     

    Attached Files:

  2. Geoff Hughes

    Geoff Hughes Cyanogen Customer

    Joined:
    Nov 13, 2015
    Messages:
    53
    Well, I ran it again and it appears to have worked. I don't know what I did differently. New screen shot attached.
     

    Attached Files:

  3. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    6,057
  4. Geoff Hughes

    Geoff Hughes Cyanogen Customer

    Joined:
    Nov 13, 2015
    Messages:
    53
    That's the key. Thank you. I think I had the roundness threshold set too low the first time.
    So when I get the message "Only 14 of 22 images were calibrated." is there a way to find out which ones were calibrated without looking at every FITS file? Also do I need to manually delete the bad ones or will Maxim ignore the uncalibrated ones when stacking?
     
  5. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    6,057
    Check the log window.

    You want to figure out why those images weren’t calibrated. One possibility is that they already had been.
     

Share This Page