Synchronize image capture for multiple STF-8300M cameras

Discussion in 'Image Capture' started by Andy Register, Mar 31, 2016.

  1. Andy Register

    Andy Register Standard User

    Joined:
    Mar 25, 2016
    Messages:
    6
    I am planning on building a small cluster of 3 STF-8300M cameras. Is there a way to trigger the beginning of image capture so that all three begin at the same time? I looked at the manual and the Telescope Jack does not appear to support this sort of hardware trigger. I could not find a pin out description for the I2C connector.
     
  2. Tim Puckett

    Tim Puckett Guest

    Hi Andy,

    Attached is the I2C TTL info .
    PM me if you need more info.

    Thanks
    Tim
     

    Attached Files:

  3. Andy Register

    Andy Register Standard User

    Joined:
    Mar 25, 2016
    Messages:
    6
    Woo hoo! This is exactly the info I needed. Thanks much.
     
  4. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    2,440
    Sounds like someone's doing tri-color Jupiter work or something... enquiring minds want to know!
     

Share This Page