Resolved Firmware Bricked?

Discussion in 'Legacy Models - Community Support' started by Sean Heneghan, Feb 26, 2020.

Thread Status:
Not open for further replies.
  1. Sean Heneghan

    Sean Heneghan Standard User

    Joined:
    Mar 2, 2019
    Messages:
    8
    Decided to update my firmware, it stopped on TX Timeout Error so I left it and came back to Driver Checker "not responding" and ended up with windows closing it. Cant establish a link to the camera anymore in imaging software or driverchecker and when powering on the green LED blinks 3 times then stays off. So i am assuming its bricked. Is there anything I can do on my end to possibly fix it, frankly sending it in is not in the budget for me currently.
     
    Last edited: Feb 26, 2020
    Sean Heneghan, Feb 26, 2020
    #1
  2. Tim

    Tim Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    1,842
    When you plug it in, does anything show up in the Windows Device Manager?
     
    Tim, Feb 27, 2020
    #2
  3. Sean Heneghan

    Sean Heneghan Standard User

    Joined:
    Mar 2, 2019
    Messages:
    8
    Yes, it shows SBIG USB-64 Camera With Firmware.
     
    Sean Heneghan, Feb 27, 2020
    #3
  4. Tim

    Tim Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    1,842
    Which camera model is it?

    We *may* be able to remote in to your PC, and use our programming software to recover it. Can we arrange that?
     
    Last edited: Feb 28, 2020
    Tim, Feb 28, 2020
    #4
  5. Sean Heneghan

    Sean Heneghan Standard User

    Joined:
    Mar 2, 2019
    Messages:
    8
    Its the STT-8300, yeah that will be fine if its possible.
     
    Sean Heneghan, Feb 28, 2020
    #5
Thread Status:
Not open for further replies.

Share This Page