Mounting SC-2 to FW8-8300

Discussion in 'Guiding and Adaptive Optics - StarChaser and AO' started by PeteFleurant, Apr 1, 2020.

  1. PeteFleurant

    PeteFleurant Standard User

    Joined:
    Oct 1, 2018
    Messages:
    18
    Location:
    Massachusetts
    Hi,

    Attached:
    FW-8; my filter wheel
    SC-2: StarChaser
    man1: snapshot of user manual for SC-2, p.10
    man2: snapshot of user manual for SC-2 p. 11

    I know it doesn't make any difference but the picture in your SC-2 User manual (Version 2.0 20 Dec 2019)
    does not match my FW8-8300.

    As you can see from the attached files, the holes don't line up. They are off by 45 degrees.

    Clear skies and stay safe.
     

    Attached Files:

  2. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    7,379
    Location:
    Earth
    Thanks for reaching out.
    Can I get the serial number of the Filter Wheel?
    I'm going to ask our engineers to have a look.
     
  3. PeteFleurant

    PeteFleurant Standard User

    Joined:
    Oct 1, 2018
    Messages:
    18
    Location:
    Massachusetts
    Hi Colin,

    FWF180410

    Also shown in the jpeg that was attached.

    Thanks!
     
  4. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    7,379
    Location:
    Earth
    Sorry, missed the first image, was looking at the last. Thank you.
     
  5. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    7,379
    Location:
    Earth
    We'll get back to you soon, and recognize the issue. Hopefully we will have a resolution tomorrow. Thanks for your patience.
     
  6. PeteFleurant

    PeteFleurant Standard User

    Joined:
    Oct 1, 2018
    Messages:
    18
    Location:
    Massachusetts
    Thanks for your support!
     
  7. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    9,934
    So it seems someone back in the day thought it would be fun to orient the screw holes on this model differently from all the others, and we didn't notice! I'll take the blame for that one. D'oh!

    In this case I think the fastest way to resolve it is to do is to swap out the front plate of the filter wheel. We can modify a plate to have extra four threaded holes in the correct place. @Tim please provide RMA and instructions. So you're not waiting we'll get one in stock modified and send it to you while yours is on the way back.
     
  8. PeteFleurant

    PeteFleurant Standard User

    Joined:
    Oct 1, 2018
    Messages:
    18
    Location:
    Massachusetts
    Ok, sounds like a plan.

    I will send my FW8-8300 cover to Diffraction Limited.

    Please specify address and to whom the "attention" is addressed.

    Thanks!
     

Share This Page