Unlikely to be 1/2' bolts stretching Tim otherwise half the structures in the world would be falling down! Chemical bolts are actually much...
You just caught me as I was about to turn in for the night.... Quite possibly running Disk Cleanup on Windows 7 and/or unplugging the camera...
Mike. I’m not sure about the various capture settings for the ALUMA CMOS camera and how that might affect FocusMax. The camera we were setting up...
Mike. As you are also having guiding issues with the ALUMA then possibly the FocusMax issue is connected but just in case you missed this.......
Have you created a profile for the new camera in FocusMax? How old is your copy of FocusMax, which build, exactly..? FocusMax needs to...
Hi Niall. Re: The single-use pipe tails, it's not that the tails are single-use, rather it is the type of pipe used. Soft natural rubber piping...
Hi Niall Have some experience running water cooled medical imaging cameras over the years and there are a couple of tips I can pass on. Yes, you...
Thanks Colin. I have outlined the sequence of steps used in PixInsight on Jim's image below. I have sent Jim a PM with attached .pdf listing the...
Hi Jim. I have processed your raw image set for M33 and you will be pleased to know that there are no issues with the camera, the raw data is...
Hi Jim. Unfortunately no one here uses CCDStack and it is appears that the processing sequence you are following is wrong in some way. It is...
Hi Doug. I might be wrong but I think the latest images that Jim posted are just single subs, no calibration or stacking involved. Hi Jim. Yes,...
Hi Jim. I had time this morning for a quick look at your latest images and there is nothing unusual in them. The "red" dots are the uncalibrated...
Kenn. “Flat Darks” are optional and you should not use them as a substitute for “regular Darks” that match the exposure time of the lights. Some...
Hi Kenn. Doug will reply soon with some observations and suggestions, FWIW, I had a look at your latest Ha and dark and it appears that your dark...
I had a different thought when looking at the ~9114~ image, it reminded me of a calibrated image where the dark was contaminated by an...
Alan, I'm with Sreilly and his assessment that something else is moving in the image chain. There is no way that a guiding error can cause the...
Shouldn't be problem Brad. I use a different make of camera(s) with the KAF8300 chip and RBI pre-flash is used on those cameras without any...
Hi Brad. Try programming a short pause between exposures of ~1 min and see if that improves or brings some consistency between frames. The amp...
Hi Mike. With PI the calibration option "Optimise" should not be used if the dark frame has amp glow as the glow creates a false noise evaluation...
Hi Mike et.al. At the risk of muddying the waters further... If Doug can see nothing obvious wrong with your settings there are a couple of...
Separate names with a comma.