Oh, that's good. Detailed instructions on how to upgrade the firmware would be helpful when it is available. Thanks,
Would that be a luminance frame? How long, 300" and which capture method? Of course this will be a big file. I do have darks and bias frames,...
It is a big file...and I 1/2 sized it but here. As I mentioned, none of the gain settings have been modified (purposely) on my part, have not...
Attached is a five minute unguided image of M81 through the CDK17/Aluma AC4040. I had it set to simple auto dark, camera cooled to -20 and used...
Doug, any idea when the driver might be available? As on another thread, have had issues with the guiding, as you are aware. Have done...
Thank you Collin, among other things will move the sensor a bit and see how that goes.
OK, so when I shoot an image through the main camera, I see the dark outline of the mirror on the lower part of the image, maybe 10% to 15% into...
Yes, I would beta test it. One variable. My wife and I close on a house in rural New Mexico March 25. Oddly enough, will be setting up a larger...
Yes I do quite understand that there numerous variables. I have dialed back aggressiveness, increased the minimum move, increased the delay after...
This is a problem I think. I suspect that given the resolution, even binned 2x2 (about .65"/pixel), it is going to be virtually impossible to get...
Is there a way to bin my SC3 more than 2x2? At my focal length, 2940mm binned 2x2 gives me about .65"/pixel or so. Chasing the seeing is putting...
Odd question, has anyone figured out the numbers to use in The Sky (in my case version 6) for setting up an AC40404 and SC3 guider for the field...
Adam. Thanks for fixing this. Obviously it seems that it was operator error. I'm not surprised in transferring from the STL camera to this one,...
I tried the suggested, above. No dice. As I have never used TV (no need to ever do so), I just installed the free version and will send...
I did the test suggested. Unplugged the filter wheel from the camera. Attached USB cable to camera, plugged power into camera then plugged cord...
I will do this later today and report results. Again, not sure if it was "hot plugged" or not. Certainly the camera was not connected to...
Could a USB cable not plugged in all the way or some such thing cause this, when the camera was connected? My ancient ST10 had some weird problem...
It is likely a hardware problem according to Doug. I have tried what he suggested, namely using another usb port...nothing. Tried reloading the...
reloaded drivers, or tried to...same thing....so it is dead apparently. Now what?
Tried different usb port...and a different cable, light comes on, fan comes on, filter wheel turns BUT will not connect, gives me a window "error...
Separate names with a comma.
