I really appreciate both of your suggestions, Doug and William. I’m using the software provided with the package of software I received when I...
Of course the previous mentioned process is after Calibration using Master Darks and Master Bias in the Data Subtract tab, Master Flat(based on...
Doug, back in Apr 21, 2019 you suggested "use a sigma clip or SD Mask process to combine the frames" and that I should dither the images. Through...
Sorry I did not realize it had any processing completed. OK I can do that. Also attached in the latest Dark. Kenn
Sorry, I do not understand. I was under the impression you did not want the Master Dark, nor the Flat Master Blue. No images were attached with...
As requested one unprocessed Dark 'D_2020-07-23_19-53-20_Darks_300s' and one unprocessed light 'L_BLUE_2020-11-17_19-57-47_M-33 C-8 HD_180s'
When ever I use darks I always, without fail, get ugly dark spots in my calibrated images. I use Darks, Flats, Bias, and Lights in CCD Stack...
KennPlease forgive my continued questions. I've tried to add some washers, had to cut off one side of the washer to make them fit, and almost...
Again, Thanks for the insight. If I understand correctly: if I 'raised' the adapter--say 4 washers between the adapter and the STF8300 body where...
One final question. I was unable to obtain focus using the 75-300 Canon Lens but I have two other lens for my Canon 20D the 50mm and another zoom...
Duh...…………… I was pressing the 'round silver button' in towards the lens, similar to how the 20D Lens Release works. It took me a minute to...
Thank you for your response, the first response was a little disconcerting. It was purchased from OPT March 26, 2020 as a New Item. I'm unable...
Thanks for the response. I purchased the product through OPT. Does it really matter who I purchased the product from since it is a SBIG EOS...
Purchased your CLA-FW-CANON EOS Adapter so I could attach my Canon Lens to the STF8300m I have. Great I received the product and placed my 75-300...
Thank you for that explanation. I know a little knowledge is dangerous and I have no desire to 'mess' with the settings I was just curious and...
I saw in CCDOps the Gain of my STF8300m camera is 0.37 and the Offset was 135. Would it be possible to obtain an explanation of what the Gain is...
I love that answer :). I've been shooting for 40,000 but after processing the flats they well come out between 37K and 39K so I'll leave it at...
When taking flats I've been told the best ADU value for the flats are around 20,000, I've also heard 30,000. Recently I was told I should shoot...
Thanks for your response. Kenn
I have been setting my cooling to -10, then when the imaging session is finished I turn on the warming using APT or Astro Photography Tool....
Separate names with a comma.