Thanks. Blaming new reading glasses on missing this before! Settings were set to Sum and Clip and I enabled the Status LED, if that matters. Some...
I cannot find where these settings are in MaximDL Camera Control or DLImaging AO Control.
Thank you Colin. -Al
My system has the AO-X, SC4 OAG, AFW 50mm 12 position filter wheel and STXL16200. The Starchaser manual instructs connecting the db9 end of the...
Colin and Tim, I took a fresh laptop and installed the SBIGChecker and MaximDL 7.13. The same results, everything works until I move the filter...
Colin, I'm familiar with these checks from working on my own equipment. Hadn't occurred to me to do this, but it has been a while since the PC...
Tim, There are other computers in the observatory with no software loaded. With a long enough USB cord, I should be able to try this. Already...
Looks like this dll is not in my SysWow directory. I am using the 64-bit Win10 and Maxim 7. SkyX and Prism are normally run in 32-bit mode,...
I quit everything and still cannot connect to the SBIG server. I think that is a problem with my hardware that I will have to fix before going...
SBIG w/AO Driver Version 7.1.0 or if I use the Universal driver, SBIG Universal Version 7.1.0 Something else odd. At first it would Connect To:...
Colin, I cant physically do that unless I take off the CDK14 OTA and undo the through the mount power cable. I'll have to take the imaging train...
All of the magnets appear to be in place. Camera is on a 7 ft pier with power cable through the mount. Had to remove imaging system to open...
Colin, looks like weather driving conditions won't be good for me making the trek to the observatory until Wednesday. A couple of questions...
Thanks Colin. I'm socked in by a Winter storm today and hope that by tomorrow or Wednesday at the latest I'll be able to make the drive out to...
Note - The camera read all 8 of the prior FW8G filter wheel.
[ATTACH]
Thanks for replying on your day off. The sbigudrv.dll is 5.1.10 I am trying to schedule a trip to the observatory tomorrow to take the cover off...
Newly installed AFW12-50-R wheel is installed to STXL16200. Attached to wheel are new SC-4 autoguider and AO-X. Have not yet attached guider as...
AOX and mount calibration done in Maxim DL 6.29. Must I re-calibrate for auto-guiding if I switch to imaging with other software, such as SkyX...
Okay, I'll give Bill a chance to chime in. Shutter opens and closes properly.
Separate names with a comma.
