Jurriaan, You're using an old version the DriverChecker. The one you're using was current when the release version was 2.49. The latest/last...
If memory serves, 3K ohms at room temperature is what we used. I don't know what the part number was. -Bill
The thermistor is physically located underneath the ccd, underneath the thermal tape that the ccd sits atop of. Although I know that there is one,...
It's most likely an open thermistor.
That would rule out the chip on the digital board that affects the relays and the port that the CFW-8 connects to.
Does it guide? -Bill
Mike, I have a D block with the T ring. Send me an email, bill@ sbig.com, if you're interested. -Bill
The CFW-8 connects to the AO/CFW/SCOPE port on the camera and a Com port should not have to be selected in order for it to operate. Simply select...
I might, let me look and I'll let you know. -Bill
4-40, 3/8" or 5/16,". Cone point if you can find them.
Doubtless these cameras need short boards of which I have none. I assume there are some in Ottawa hence my suggestion to Shai that he send his...
If that doesn't work, I have a digital board that could be used as a replacement. Send me an email, bill@ sbig.com, to see about sending it in. -Bill
It certainly looks "broke". Were any adjustments made with the shutter?
by chance, was there a firmware update interruption? -Bill
I suspect the analog board which there are no more. -Bill
Philippe, I would have to know the box dimensions and weight and the postal code. -Bill
How old are the cameras? Pre 2003? -Bill
That's something that would have to come in. -Bill
I've got a couple of used ones.
Never seen that before. Take the boards out of the tube and look at solder joints and connections, the magnet on the shutter...
Separate names with a comma.
