Hi Colin, I tried that already. Power cycling, and even leaving it off for several hours, didn't change anything. Also, using MaximDl 5, 6 or...
Okay, they arrived yesterday and we mounted them. Still the issue with the cooler indicating -116.2°C (and sometimes -110.2°C) persists. I am...
So just got this: [ATTACH] Once again... only difference is that I conected first via TheSkyX and later with MaximDl 6.24
[ATTACH] For the records... The plastic pieces seem to be dried out or even melted :) [ATTACH]
I think we will try for now to just hang it back, but i would still take your offer and order a set of isolators. Shall I send you a separate mail...
Colin, I will let you know the s/n tomorrow. It is located in spain, so if we can arrange for a local repair it might be pretty easy (opposed to...
So today I let the technicians on site check the camera, and they found the fan dangling: [ATTACH] It looks like the screws lost grip. Any advice...
Hi Colin, so last night the temperature was normal without any sudden spikes; the whole night was a breeze to be frank. Let's watch it for a few...
The images are perfect so far, only the temperature is an issue, as it is basically unknown... btw, I updated to MaximDl 6.24 and will test...
Hi Colin, alright, so first of all some affected frames: https://drive.google.com/drive/folders/1EZdAaKZCQNiZFDYmLtDziMSAxoyFCVRL?usp=sharing...
Okay I can confirm that the camera works now as expected. The only quirk I can see is that at some point during the night the cooler reads an...
Okay, one night went without issues. What I've done: - run a sfc /scannow scan, returned no big issues - updated to MaximDL 6.21 (for some reason,...
Hi Colin, thank you for your exhausive answer. What I did in the meantime was to ativate the debug log in SBIGDriverChecker, and got this (before...
Hello, I am struggling to narrow down one issue that I have with an STF-8300. I have the latest drivers and also the latest firmware, and am using...
Hi Doug, sounds like being a very interesting camera. Do you have some test frames available? I saw quite some odd stuff going on with this CMOS...
Hi there, I was wondering if it is possible to buy only a single faceplate (I'd need the STL one) for my OAG-8300? I used the OAG with an...
Hi Doug, I am sure you use good materials and I agree that this is very strange. Maybe the best would be to return it for inspection, as we truly...
HI Doug, thanks for your quick answer. Is there anything between the Peltier and the heatsink, like some glue (like on the heatsinks of modern...
Hi guys, I am operating a Veloce 200RH in Spain remotely, and we are using an SBIG ST8300M camera with it since a few years without issues....
Ok, today a few guys down there have unmounted the filter wheel and inspected it. It seems that they were unable to find out any more details - it...
Separate names with a comma.