Hi Doug, I agree about the shutter delay, so I am listening to the hardware output signal indicating that the shutter is open. The delay between...
Hello, I'm using a SBIG STT-3200ME camera and the exposure time is fixed at 1 second. I am trying to do a millisecond precise imaging so I am...
Hello Doug, We are not really equiped to make this kind of measurements right here. We made some attempts to determine shutter speed with a...
Hello Doug, Thanks for you confirmation of the constant rotation speed. But please could you also tell me the value of its exact speed. Does this...
Hello, We are still in our quest for high accuracy time stamping of our pictures. For a ultimate refinement, we now have to consider the shutter...
OK! It's clear now. Many thanks!
OK, we will add a pull-up resistor because we don't have some in our current setup. But then could you please confirm that the voltage range we...
Hello Adam, We are still working on it but we have the following observations to report: There is no output signal at all from PIN2 (Open...
Hello Doug and Adam, First of all, I wish you a happy new year! We managed a couple a days ago to determine the latency between the exposure...
Hello Doug and Adam, We were aware of the extra delay you mentioned and we considered it. Beyond this bias that we could correct, the hard point...
Hello Doug and Adam, It’s works but… We then put the camera on a test bench (cf. description in attached powerpoint file) to check...
Hello Doug and Adam, Coooool, it works! Many thanks for your help and patience! Bye, Gautier
Hello Adam, Thanks for the explanation, it worked just fine. We'll make an attempt tomorrow for the triggerring. Do we just need to connect one...
Hello Doug, I hope you're doing well. I come back to you because we are still waiting for your answers to the questions I asked in the previous...
Hello Doug, 1. OK for the I2C description in UM but it doesn't tell us which signal has to be transmitted to trigger In pin. Is it a +5V --> 0V...
Hello Doug, Thanks for the notification. We first updated MaximDL to 6.13 as you suggested and it worked just fine! Then we started...
Hello Doug, I am sorry but I can't reach the link you gave me: Diffraction Limited - SBIG / Cyanogen Forum - Error You do not have permission to...
Hello Doug, I do confirm we need such a firmware update and a page of explanation on how to connect I2C and command the trigger. Our projet is...
Hi Doug, In fact we are commanding the camera with a Python script through MaximDL. Below is an example on the way we control it: def...
Separate names with a comma.