I found this photo on the web. It seemed the screws were socket screws but not 3/16 ... [IMG]
So 3/16 excluding head, according the drawing in the link. I bought 3/16 including head ...
I need to attach a CFW-9 v2 to an ST2000XM. I haven't The needed screws to attach the wheel to the camera body. According to manual these should...
Found screws characteristics on wheel manual and ordered at hardware store ... i was thinking they were more difficult to find.
Hi, some time ago i buyed an used CFW9v2, i had another which was assembled with an ST8 when i got it. Now I need to attach this spare wheel to...
Starbook has same connection as CG5 (only direction changes) ... [IMG] [IMG]
Thanks a lot for the infos. I used cables wired in that way, not by me, i buyed them but are ok because i checked with a cable tester. What...
1. With Camera turned on and cable with same pin layout on both plugs mounts responds only to -Y, -X referring The Sky X relay buttons. But if i...
If you remember we discussed about the necessary pinouts: http://forum.diffractionlimited.com/index.php?posts/17642/ I tried however with an...
In case of a faulty guide port do you think SBIG/Diffraction Limited could fix sending camera to them?
Thanks for the answer. Cables I tried have correct pinout. I asked to support forum to have confirmation also. I tried even with a battery pack...
I was doing autoguide tests with a ST8-XME to try and tune my setup. I noticed a strange thing immediately. I connected cables, ST4 one and turned...
Ok. Thanks.
Ok. I supposed it. Very clear. Thanks a lot for the answers. I can open another thread if so I will do but I need to know the backfocus of the 2"...
Ok. Clear. I had found this old document which reports TIC-78 pins layout different from the actual documentation. Maybe did something change...
Thanks for the reply. I ask to myself why the original SBIG autoguider cable has pin colors inverted in one end, a lot of ST4 ports of today i...
Hi, i need some support for making/using the right type of cable for an ST-8XME. This is the connector where i need to plug it: [IMG] Do i need...
Separate names with a comma.