I think that the equipment you make is very well made and of high quality. You have also taken good precautions to protect the equipment like the...
Colin, Doug, I have now reconnected the cooling and tested the camera. Everything appears to be operating normally in terms of the cooling...
I have repaired the water circulation pump. I'm not sure if you still supply these, but if so I would recommend changing to something more robust....
The 10A fuse was indeed blown. I've replaced it and the camera starts up as normal, although I haven't tested it in operation yet. What do you...
Hi again Doug, thanks for your reply. As far as I know, even though I didn't have the water cooling in operation, the fan was still in operation...
Hi Colin, thanks for getting back to me. Yes the power supply is original. The blue light on the power pack comes on, and with a voltmeter I can...
Hi Colin, Doug, I have been operating my SBIG 16803 camera for a number of years without any real issues until tonight. I purchased the camera in...
See my response to Doug please Colin.
I understand very well Doug, that when the power draw is 100% that the system is basically not controlling. I did control engineering in my...
Hi again Colin, I have already seen the camera cooling shutdown issue when running the camera with TheSkyX, however, I have not run it long enough...
Thanks for that Colin. Yes SGPro does keep a log. I have looked at these before but didn't find anything terribly illuminating. However, I will...
I was monitoring the performance of my SBIG 16803 camera tonight, through Sequence Generator Pro. The ambient temperature has been steady at about...
Doug, the cooling fan is running all the time. I am generally easily able to achieve the set temperature, unless the ambient temperature goes over...
Colin, the green light remians illuminated all the time, indicating sufficient voltage. The Red LED is normally illuminated although I have also...
I'll checkthat the fan is working alright Doug, particularly if and when I get another of these drop outs. Thanks.
I'll check that out thanks Colin. The ambient temperature has been between 15C and 20C.
I bought a SBIG 16803 in mid 2019. You may recall the challenges I had early on with fan vibration. I replaced the fan and the camera has been...
Thanks Colin. Have you seen this issue before?
As a follow up, after using the desiccant to dry out the camera internals, the artefact was gone when I repeated the Flats. Also CCDOps tells me...
I have an SBIG 16803 attached to a C14 Edge HD. This morning I went to do Flats. I have a large Lightbox which I place on the ground alongside...
Separate names with a comma.
