https://www.dropbox.com/s/7mpwdyc3vl8skh9/20190821_134731.mp4?dl=0
Ran this test, it does not move in y- axis. All of the others do. I have a video of it in my google drive that I can share with you if you would...
I removed the camera so that I could observe the ao plate. I exercised it a 200ms and it seemed fine. Ran the calibration, also seemed like it was...
I will try that and let you know.
The error I was getting when using tsx was "motion too small"
ao calibration
will that change the amount of deflection that the ao will do for calibration? I thought that allowing 100% tilt did that.
Yes there is a cable from the camera guide port to the lx200 mount and we are using the one that came with the camera. The relays calibrate with...
Tried to calibrate with ccdops last night without success. The program indicates that it is calibrating AO-7, not AO-X. Is this correct? I didn't...
I had not seen the updated manual. I think there may be some things in there that will help. You will find a post from me on the txs support forum...
The mount calibrates successfully, the failure occurs when trying to then calibrate the ao tip/tilt
F10 16 inch Meade lx200 gps, stx16803, fw-7stx,stx guider. Have not been able to get the ao-x to calibrate. Continue to get x+ motion too small...
Would be very interested in what you think caused the board to fail on the third time it was powered up.
Not looking at it now, I guess that maybe there isn't an I2c in port on the fw
Yes, with the hard wired pig tail. Should I try it with the cable that goes to the ao? I am away from the camera now and won't be able to try...
It does not spin on power up. I re verified that with the filter wheel unplugged, I was able to exercise the ao with ccdops.
You can hear and see the AO moving when connected to the camera as well as when the FW is connected to the I2C out port of the AO. With the FW...
also, the i2c out port on the ao does have a red light on when filter is connected to it.
Took the filter wheel apart to blow some dust off of filters. After reassembling and reconnecting all cables the wheel doesn't turn. The filter...
Actually, the guy doing the imaging and setting the equipment up is a "Pro". He has done work in a number of observatories around the world and is...
Separate names with a comma.
