The HDMI cable between the camera and filter wheel has had a history of being bad. I went through the same thing with my camera. I bought a...
Thanks Doug! Good to know. :)
Here is the quick N dirty JPG. The top left is the red channel, the top right is the LUM, the bottom Left is the green and the bottom Right is...
Doug, Here is the link to dropbox, and I'll also include a quick JPG here so that those who don't want to download 160mb of files to look at. The...
I'll do that Doug! It'll probably be a day or two before I can get to it. :)
Hi all; I was wondering if anyone here has had this before, and if not, Doug George, can you share an opinion? What I have is my bright spot on...
I've experienced the same thing and like Doug said, it's a result of the design of the KAI 11002 chip. I use CCDBand-aid to remove the banding....
I had halos like that with my old Baader OIII filter. I switched to the Astrodon 3nm OIII filter (actually bought the whole set) and the halos...
I have run into the same problem with my FW8G filter wheel. I used purple Locktite thread lock on the center screw. You only need to tighten it...
Thanks Tim!
Thanks Joshua!
Hi all; I had a few good seeing nights and was lucky enough to get some good imaging time on this one. Scope : AG Optics 17" iDK Camera :...
Hi Tim! The mic thing was just an attempt at humor. :) I'll definitely give you a call some time when I get back in the observatory and can...
[ATTACH]
This is something that I've always wondered about but never pursued until now because the phenomenon always calibrates out... But with my STXL...
I see you made a pinned post about updating the firmware! I learned in college that if you can't be a good example, then you have an obligation...
That's great news Bill!! I sure do appreciate it! Dan
Thanks for the advise guys! I sent the camera in a few days ago so hopefully I'll get it back soon and be a little wiser next time. :) Dan
From what you describe about the camera shutters making the click, click every time a guide exposure is taken, when you start imaging with the...
I just updated the drivers that were out of date and since I was having a problem with my guide chip occasionally not reading out any data after...
Separate names with a comma.