Thank you for quickly resolving this issue for me.
Yes it is accessible by team viewer. I should be able to have the camera set up for connection in around 30 minutes time. Is that OK with you?...
Hi, I was updating my SBIG STT-8300 firmware and the update failed halfway through the process. Windows still sees the camera in device manager...
One last question, The mount manufacturer has responded that the problem is that the pin out of ST4 port for SBIG cameras is different from other...
Thank you, I will suggest grounding loop issue to the mount manufacturer.
Unfortunately I have already confirmed it is not the cable as I have used 3 different cables, one of them from a different company. Strange thing...
I am having some trouble with my mount and the problem only shows up when I hook up the ST4 cable to my STT-8300. When I connect a different...
Here are the photos. Please note the place where the AO glass holder scratched itself on the STL male thread that was screwed in. What could have...
Bill, It works in CCDOps, but I have had some odd behavior on the AO8. Suddenly the glass inside the AO8 unit twisted itself and jammed itself at...
Any ideas from tech support team?
Hi, I just got my camera back from service (STT-8300, self guiding filter wheel and AO8T) and I am running Windows 10 with Maxim 6.09. The camera...
I attached the camera to a different battery and the problem went away. This is odd as my power analyzer says the first battery was outputting a...
I will look for the original power supply, I remember that I stopped using it because the connector was falling apart. I would highly recommend...
Doug, My camera has developed some odd behavior. I normally run my camera from an 85 Ah battery. I have installed a power meter on my battery so...
Thank you
I am planing my power requirements for battery size decisions. I am running an STT-8300 with the self guiding filter wheel and AO8 unit. How many...
Thank you, exactly what I was looking for
Hi, I have had my STT-8300 for a while now, you might say I was an early adopter. At the time of release the manual only showed the ethernet...
Separate names with a comma.
