Ao8t installation

Discussion in 'Guiding and Adaptive Optics - StarChaser and AO' started by chrisscottmaier, Feb 28, 2015.

  1. chrisscottmaier

    chrisscottmaier Standard User

    Joined:
    Dec 10, 2014
    Messages:
    20
    I have the stt 8300 with the fw8g-stt filter wheel. Seems like I can install the ao8t either with the cables going the same way as the filter wheel or opposite(180 deg) which is correct? The manual doesn't have instructions for installing on the fw8g-stt. Thanks...
     
  2. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    10,316
    It's not critical. Usually they're installed going in the same direction, but the software determines the orientation when you calibrate the AO.
     
  3. chrisscottmaier

    chrisscottmaier Standard User

    Joined:
    Dec 10, 2014
    Messages:
    20
    Thanks for that..
     
  4. GlennS

    GlennS Cyanogen Customer

    Joined:
    Oct 10, 2014
    Messages:
    106
    Location:
    Danville, CA and Scottsdale, AZ
    I was told by SBIG tech support rep Dave M. That it should be opposite to allow the AO-8 plate to fit the camera better.
     
  5. chrisscottmaier

    chrisscottmaier Standard User

    Joined:
    Dec 10, 2014
    Messages:
    20
    That's the way I installed it, but it seems like it could be installed the other way as well. Thanks
     

Share This Page