Do not connect AO-X and STXL-11002

Discussion in 'Adaptive Optics (AO)' started by taewoo KIM, Jul 9, 2015.

  1. taewoo KIM

    taewoo KIM Standard User

    Joined:
    May 28, 2015
    Messages:
    17
    Hello.

    I using maximDL 6. also 6.09 verson.
    connect STXL-11002 = camara 1 sector
    connect AO - X = camara 2 sector
    It is always 'Not initialize'
    I don't know this...
    I also connect cable.

    I show you picture.

    Last picture is wrote 'Camera 2 failed to open'

    When I push the button(first picture switch) in the AO-X. It is working AO-X
    Four motor operating up and down.

    Why do not connect AO-X?

    Thank you.

    PS. Do not upload picture. sorry You can click dropbox link. Thank you

    https://www.dropbox.com/sh/suycfzgfqyn4ncc/AAC5Rf7mpueZh0NlJ1OkJHODa?dl=0
     
    Last edited: Jul 9, 2015
  2. Tim Puckett

    Tim Puckett Guest

    Do you have a remote guide head attached. The AO-X is powering up.
    You need the guider to give it instructions.
     
  3. taewoo KIM

    taewoo KIM Standard User

    Joined:
    May 28, 2015
    Messages:
    17
    remote guide cable direct connect AO-X?
    How can connect AO-X cable?
    Can you show me image?

    Thank you.
     
  4. Tim Puckett

    Tim Puckett Guest

  5. taewoo KIM

    taewoo KIM Standard User

    Joined:
    May 28, 2015
    Messages:
    17
    Also I read this stxl and aox manual.

    If I don't have a filter wheel. Because It is repairing

    Have you seen my image in dropbox?

    I have only STXL-11002 and AO -X

    I don't have a remote guide cable.

    I'm sorry.. understand..

    thank you.
     

Share This Page