Resolved FW8G-STXL Giving Error = 31002

Discussion in 'STX and STXL' started by Richard Asarisi, Nov 8, 2019 at 8:01 AM.

  1. Richard Asarisi

    Richard Asarisi Standard User

    Joined:
    Mar 5, 2016
    Messages:
    45
    Hi
    My camera and FW had been working fine for some time, just in the last week or so I get these errors. These are produced from TSX 10.5.0 Build 12304, when ever I try to change to another filter.
    I tested through MaximDL and was able to change filters over and over again, backward and forward with no errors ever.
    I searched for this error but didn't find anything related to it.
    Can some one give me some idea as to what this one is try to tell me?

    Thanks
    Rich
    SBIG STXL-11002 X16010011
     
  2. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    6,163
    If that's Error 2 from the SBIG Universal Driver, that means "Exposure in progress".

    I'm guessing that means the camera thinks you are trying to rotate the filter wheel while an exposure is in progress.

    First thing to try is using SBIG Driver Checker to update your drivers.

    Could be a TSX issue - do you have the latest version?
     
  3. Richard Asarisi

    Richard Asarisi Standard User

    Joined:
    Mar 5, 2016
    Messages:
    45
    Thanks Doug
    That is the latest version of TSX - Latest Daily Build.
    Yeah I just checked to make sure I had the latest drivers and I do
     

    Attached Files:

  4. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    6,163
    Hmm. Well this is the first we've heard of it, so maybe it's a problem with the daily build?

    So it doesn't happen in MaxIm DL. Please try CCDOPS too. If it works in both then it's almost certainly a TSX issue.
     
  5. Richard Asarisi

    Richard Asarisi Standard User

    Joined:
    Mar 5, 2016
    Messages:
    45
    Thanks Doug
    Tested in CCDOPs no issue I can move through them all one at a time or jump around, never get an error.
     
  6. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    6,163
    I’ll have to recommend taking this to the Bisque forum.
     
  7. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    2,431

Share This Page