Header Exposure Time

Discussion in 'STF Series CCD Cameras' started by Louw, Jun 8, 2020.

  1. Louw

    Louw Standard User

    Joined:
    Jun 4, 2018
    Messages:
    6
    Hi
    I want to know the time when the exposure takes place using a SBIG 8300 STF. Is it the Start,Mid or End time?
    Thanks.
    Louw
     
  2. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    4,294
    The header date/time depends on the software that you are using to control the camera.
    You didn't say what you were using.
    Exposure normally starts either when the camera is commanded, or when an external trigger signal activates it.
     
  3. Louw

    Louw Standard User

    Joined:
    Jun 4, 2018
    Messages:
    6
    Colin
    Thanks for this quick reaction . I use Sequence Generator Pro.
    Louw
     
  4. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    4,294
    Hi Louw,
    Sorry I won't be much help on that one - you should ask the makers of SGP.
     

Share This Page