Hi, My cooling part on my sbig stl11k start loosing performance. My delta temperature is around 25°c from ambiant. I think my peltier will be out of order soon. Do you have data sheet on the double stage peltier (power consumation, intensity max, voltage max ?) Thank you Noel
It's as likely to be a power supply or driver circuit issue as anything else. In any case, here's the part for the cooler used in STL: https://www.mouser.com/ProductDetail/Laird-Thermal-Systems/475010-313?qs=UExrdO6siVp7x7vG/ad2ow==
Hi Doug, Thank you for your answer. My TEC on my sbig STL11000 looks very different from mouser website. I check driver (I already install last one) and power suplly unit look ok (no latch up). How can I do to change my TEC ? It looks stick with a white thermal paste on cooling metal block. cheers, Noel
That's the part number I have listed, but these cameras were discontinued over a decade ago so I can't absolutely guarantee that the information is correct. There could be an internal electronics problem in the camera - probably more likely than a TEC failure. Yes, there would be thermal paste on the interfaces. Other than general information like that we're not able to provide technical support for these obsolete models.
Yes i know... it is a very old camera ... Do you know where i can buy an "sbig sticker"? My engraved sticker on my camera body is a litlle bit damage, paint had been removed. Cheers Noel
Hi Doug, Thank you for all information. Last question .. i check on SBIG PCB, it labelise KAI 11000 CM. I look on kodack datasheet and it means my CDD is a color with microlens on CDD. Why I cannot do color images directly whitout using color filter ? Cheers Noel
This is a page from the MaxIm DL manual, but the explanation applies to any software: https://cdn.diffractionlimited.com/help/maximdl/One-Shot_Color_Processing.htm
Hi Doug, I am really sorry to disturb you again. I lose a fluidic connection for my water cooling on my STL11K. Where can i buy a new one ? Cheers Noel
Records say Beswick QDC-101-E-2PM. I have no idea if it is still available, or where you could get one.
Hmmm.. The aforementioned part number appears to be the part inside the camera. https://www.beswick.com/catalog/product-detail/QDC-101-E_External/ The component part that connects to the camera seems to be a QDC-101-I-1008-1 ???? https://www.beswick.com/catalog/product-detail/QDC-101-I_Internal/ There are numerous options available including body material (stainless / brass). Tim
Noel, they responded with the part number of the component that connects water to the quick connection. We don't have any.
