[RESOLVED]Script to turn off cooler

Discussion in 'Scripting and Programming' started by Kristian Schlanbusch, Jul 12, 2016.

  1. Kristian Schlanbusch

    Kristian Schlanbusch Cyanogen Customer

    Joined:
    Jul 12, 2016
    Messages:
    2
    Hi

    I'm using Maxim DL 6.11 as camera control software, and use CCDAP5 to control my observatory.
    CCDAP can start the cooler and set cooling temperature in the startup procedure, and it can heat up the sensor in the shut down procedure. That is fine, but it can't shut of the cooler in the end.

    I would like to know if it's possible to write a script that CCDAP can execute after heating up the sensor.
    The script should check the set temperature for the sensor and the actual sensor temperature and when the set temperature is reached the script should turn off the camera cooler/heater?

    I'm fairly new to making scripts so I would like to know if this would be possible, and if so, I kindly ask for some help to write this script.

    Clear skies
    Kristian Schlanbusch
    Norway
     
  2. Kristian Schlanbusch

    Kristian Schlanbusch Cyanogen Customer

    Joined:
    Jul 12, 2016
    Messages:
    2
    Hi, already got help on MaxIm DL Yahoo group.
    So this issue is solved
     

Share This Page