[RESOLVED] STL11000 with STi

Discussion in 'Specialty Cameras SG-4, AllSky, ST-I' started by Tolga Gumusayak, Dec 3, 2015.

  1. Tolga Gumusayak

    Tolga Gumusayak Standard User

    Joined:
    Nov 26, 2014
    Messages:
    28
    I can't seem to connect both cameras to the computer at the same time. They both work individually but once I plug the STL, STi is lost. I see both cameras in the device manager. I have STL connected to SkyX and I want to connect STi to PHD.
     
  2. Tolga Gumusayak

    Tolga Gumusayak Standard User

    Joined:
    Nov 26, 2014
    Messages:
    28
    OK I figured it out. If the STL is connected to software already, others can't find the STi camera. But if I connect STi to whatever I want to use it with and then connect the STL, everything works fine. I hope this helps someone if they run into the same issue.
     

Share This Page