Doug, What is the name of this connector? Do you have link to Digiley? I want to replace my 16200 fan too. For 3 pin fan (red/black/yellow), should I connect yellow wire too, or only red and black? Yanzhe
Connector: https://www.digikey.com/en/products/detail/molex/0050579403/115034 You will also need pins: https://www.digikey.ca/en/products/detail/molex/0016020103/115063
The RPM wire goes to pin 3. I'm not sure if the firmware actually monitors it, but the wire does connect through to the controller.