SBIG SC3 to AO-X connection port and cable

FOr the imaging setup that uses FLI camera/filter on the imager 1 option, In order to use SC3/AO-X guiding setup one needs to connect SC3 to AOX using an adaptor cable, DL website lists it here (https://diffractionlimited.com/product/starchaser-ao-xao-8t-adapter-cable/)
and indicates that "The 11066 adapter cable has a DE9 plug with male pins compatable with AOX I 2C IN port and this is the cable that I have found in the box with SC3. However, SC3 instruction manual says the following: "Connect the Adaptor Cable (11044) between the AO-X unit’s I 2C OUT port and the StarChaser SC-3 AUX port" which means this cable needs to have DB9 female connection to match AOX OUT port....so this is confusing which port does SC3 go to ? if its OUT then I have to buy a gender changer in this case....I can't find any DB9 female to MINI DIN 9Pin male cables....could you please clarify where does SC3 connect to AOX is it IN or OUT?