SBIG STF 8300 fan replacement

Discussion in 'STF Series CCD Cameras' started by Peter Bresler, Jun 11, 2022.

  1. Peter Bresler

    Peter Bresler Cyanogen Customer

    Joined:
    Jan 30, 2020
    Messages:
    90
    Location:
    Los Osos, CA
    The fan on my camera is out. Would it be possible for me to replace it myself? What is the McMaster-Carr part number, or can you supply one to me?

    Peter Bresler
     
  2. coatesg

    coatesg Standard User

    Joined:
    Dec 4, 2016
    Messages:
    14
    Oddly, I'm in the same situation as well (though remotely hosted so we can just supply the fan for replacement and cleaning) - if there is a part number for this fan, then I would be grateful for it as well :)

    Thanks!

    Graeme
     
  3. Peter Bresler

    Peter Bresler Cyanogen Customer

    Joined:
    Jan 30, 2020
    Messages:
    90
    Location:
    Los Osos, CA
    The part number is on the fan. I got one on Ebay cheap. McMaster-Carr also has them. You will need to splice the old connector onto it.

    Peter
     
  4. coatesg

    coatesg Standard User

    Joined:
    Dec 4, 2016
    Messages:
    14
    Thanks Peter - do you happen to have the part number to hand? The camera is approximately 1200 miles from me at present! ;-)

    Cheers

    EDIT: on the ST2000XM, I had the following part number - does this look familiar?

    MB40101V2-000U-A99
    12V 40x10mm Axial Fan (wired)
     
  5. Peter Bresler

    Peter Bresler Cyanogen Customer

    Joined:
    Jan 30, 2020
    Messages:
    90
    Location:
    Los Osos, CA
  6. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    6,570
    Location:
    Earth
    What camera do you need a fan for, and if possible, serial number of the camera?
     

Share This Page