ST i c No Lomger Connects

Discussion in 'Legacy Models - Community Support' started by John Wetmore, Mar 20, 2018.

  1. John Wetmore

    John Wetmore Standard User

    Joined:
    Oct 11, 2014
    Messages:
    19
    I have a SBIG ST i c that has for the last few months worked flawlessly s a guider camera. Two nights ago, I hooked up the cable to a Windows 10 Computer, the one I always used and found the camera would not connect. It is recognized by the device manager as an unknown device but, SBIG drivers will not load to allow full function. The drivers had not been updated since the last use. I did try updating them and the driver checker said I had all current drivers already. Any help would be appreciated.

    John
     
  2. Doug

    Doug Staff Member

    Joined:
    Sep 25, 2014
    Messages:
    9,932
    First try it on a different computer, just in case something is really whacked up with your machine.

    Failing that, it may have to go in for service. Contact bill@sbig.com
     

Share This Page