ST i High and low resolution not workig in CCDOPPS

Discussion in 'STF Series CCD Cameras' started by John C, Sep 24, 2015.

  1. John C

    John C Standard User

    Joined:
    Sep 24, 2015
    Messages:
    5
    I have a ST i color and the only way I can get a picture is to bin the camera in "setup". I am running xp sp3. The camera works fine in PHD2 Guiding but I can't guide with it in CCDOPPS. I have tried seveal different cables of different lengths with the camera with the same results. Drive checker is uptodate ver 2.41.02.2 and firmware ver 2.37 any ideas. Shuter works fine green light on camera.
     
    John C, Sep 24, 2015
    #1
  2. Tim Puckett

    Tim Puckett Guest

    John,
    Did you get CCDops V5 from here?
    http://www.sbig.com/support/software/


    CCDOPS for Windows
    Version 5.57 Build 3
    January 19, 2014


    SBIG 64-Bit Driver Checker Archive
    Version 4.88 Build 4
    June 25th, 2015
     
    Tim Puckett, Sep 24, 2015
    #2
  3. John C

    John C Standard User

    Joined:
    Sep 24, 2015
    Messages:
    5
    my last download of ccdopps Ver. 5.55 build 35-nt and driveck ver 4.00 build 6 (32bit).
     
    John C, Sep 24, 2015
    #3
  4. John C

    John C Standard User

    Joined:
    Sep 24, 2015
    Messages:
    5
    I can't find were to download ccdopps 5.57 build3 when I download it installs 5.55 build 35-nt
     
    John C, Sep 30, 2015
    #4
  5. John C

    John C Standard User

    Joined:
    Sep 24, 2015
    Messages:
    5
    Just found it will download
     
    John C, Sep 30, 2015
    #5
  6. John C

    John C Standard User

    Joined:
    Sep 24, 2015
    Messages:
    5
    I installed ccdops 5.57 build 3 and drive checker 4.88 build 4.
    Results will take a oic when binned 1x1 or 2x2 but nothing in high or auto res.
    any other ideas?
     
    John C, Sep 30, 2015
    #6

Share This Page