STL 11000M - blinking 11V LED

Discussion in 'Legacy Models - Community Support' started by rg68, May 21, 2016.

  1. rg68

    rg68 Standard User

    Joined:
    Aug 7, 2015
    Messages:
    3
    Hi,

    since last night when powering on an STL 11000M it just shows the 11V LED blinking. No connection to the camera is possible through USB.

    The camera worked fine a few days ago. I measured the voltage supplied to the camera to be 12V as required.

    Is there any diagnostic meaning for the blinking 11V LED ?

    Regards

    Robert
     
    rg68, May 21, 2016
    #1
  2. Bill

    Bill SBIG Service and Repairs Staff Member

    Joined:
    Oct 12, 2014
    Messages:
    527
    It means low input voltage. Are you measuring 12V at the supply or at the camera?
     
    Bill, May 23, 2016
    #2
  3. rg68

    rg68 Standard User

    Joined:
    Aug 7, 2015
    Messages:
    3
    The 12V are measured at the connector going into the camera.
     
    rg68, May 24, 2016
    #3

Share This Page