Staff Assigned: Bill Lynch STL Shutter Error . . .

Discussion in 'Legacy Models (ST, STL, etc.)' started by Terence Danks, Mar 22, 2020.

  1. Terence Danks

    Terence Danks Standard User

    Joined:
    Dec 9, 2015
    Messages:
    3
    Been using an SBIG STL 11002M since about 2014. Had no trouble until last session.
    "Shutter Error"
    Sub exposures show the shutter not entirely opening.

    [​IMG]

    Nothing obvious obstructing the shutter inside the camera. I opened it up and the shutter is moving freely. Camera was fine the night before.

    Advice would be appreciated.

    Terry Danks
     
  2. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    2,965
    We'll put you in touch with our repair expert @Bill
     
  3. Bill

    Bill SBIG Service and Repairs Staff Member

    Joined:
    Oct 12, 2014
    Messages:
    445

Share This Page