In CCDOps, using just the Tracking CCD, or just the Imaging CCD, works fine. But, if the Camera/Dual CCD View is selected, the Tracking CCD appears correctly and only roughly 30% of the Imaging CCD appears. The Imaging window is offset to the right, and the window cannot be expanded to show the entire Imaging CCD. Upgraded to the latest drivers and most recent CCDOps, restarted the PC and the STX-16803, but the problem persists. No problem using the AO-X while imaging, so hardware does not seem to be the issue. Dual CCD View works fine with my ST-1oxme camera.
