Unable to connect to ST-8

Discussion in 'Legacy Models (ST, STL, etc.)' started by Ron Dyvig, Aug 1, 2020.

  1. Ron Dyvig

    Ron Dyvig Standard User

    Joined:
    May 1, 2020
    Messages:
    8
    I am using CCDOps5 via Windows XP Pro. Until recently, it's been working fine. I now get the message "No camera could be found. Please make sure if connected to correct port..." etc., etc. I verified that the parallel LPT's are all working, and I've tried all three ports with the same results. The camera power is running the fan as normal. Checked all the cables and they seem ok...although the DB25 connectors are very touchy!
    Advice much appreciated...

    Ron D
     

Share This Page