Resolved Waiting for filter wheel

Discussion in 'Aluma CCD Series' started by Tom Haugh, Jan 6, 2021.

  1. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    7,379
    Location:
    Earth
    Tom, I believe that we tried to get in touch.
    We've released several updates for firmware, drivers, and MaxIm.

    Camera firmware is now at v22:
    https://diffractionlimited.com/aluma-fpga-firmware/

    MaxIm is at 6.27 - in MaxIm, Help, Check for Updates

    DL Imaging drivers are now at version 2.0.2.0:
    https://diffractionlimited.com/down/SetupDLAPI.exe

    And the ASCOM drivers (in case you need them):
    https://diffractionlimited.com/down/DLImagingASCOMDriverInstaller.exe

    These should be updated as a set - versions can't be mismatched.

    @Adam Robichaud may wish to chime in.
     
  2. Tom Haugh

    Tom Haugh Cyanogen Customer

    Joined:
    Dec 8, 2017
    Messages:
    58
    I updated Maxim and the drivers and firmware. I tested the camera/filter wheel over three separate nights without any duplication of the problem. I consider this closed.
     
  3. Colin Haig

    Colin Haig Staff Member

    Joined:
    Oct 27, 2014
    Messages:
    7,379
    Location:
    Earth
    Great. Enjoy!
     

Share This Page