Good point, I'll change that now. What about the tolerance? Thanks
Thanks Colin. So I'll set the ADU limit to 1000 and give it a 300 ADU target tolerance. What would you suggest for minimum exposure? I currently...
What is a good target value for sky flats with this camera? What I recall going for with the STL/STX was like 30,000 ADU.
That was the issue......boy I feel dumb..
That's totally inaccurate. The difference is the raw MaxIm FITS file versus the FITS header after Astrometry plate solve. But the incorrect...
OK getting weirder by the moment, the same image opened in MaxIm report s a 3038 focal length and the same in Pix Insight shows 4235. The design...
If I look at an image taken using MaxIm though APCC APPM (AP app) the FITS header gives a image scale and focal length that is incorrect...
John can likely give you some guidance on selling it but knowing the size and condition makes a difference. A friend of mine had a 16" RCOS that...
This is remote at SRO so no real way to tell if the fan is actually on. Altitude is 4,610'
I've been working with the camera for a few hours working on settings and I notice that the camera cooler stays about -8 at best. My usual setting...
Measuring the rear cell plate diameter should give you a good idea. The mirror size will typical be maybe 2" or so smaller that the rear cell...
Sorry for your loss. That Scope appears to be an RCOS which is no longer in production. Actually the company closed down some years ago but if you...
What cameras, make and model?
I don't use TSX in this manner but I would certainly check to make sure the settings are saved after making any changes, disconnect, then restart...
This camera is mounted to a 24" RC at SRO and nearing completion of setup for remote use. As I've used SBIG cameras from the ST-7, ST-8E,...
It may be obvious at this point that my experience with the STL-11000 and STX-16803 not to mention ST7, ST8, ST10 and so on aren't helping me here...
Thanks Doug. Last night while trying to do some mapping I had it set to -5 which seemed to do well and used auto dark. I didn't look to see what...
Thanks Colin. By time I was making any real progress the clouds had moved in and the roof closed (wasn't connected to SRO weather). Bottom line...
One last question, and you've been very patient with me, what is a reasonable cooling set point for this camera? With mys STL-11000 and STX-16803...
OK I think that part is cleared up. Next question is does the image display always show the image and a identical black square below it normally?
Separate names with a comma.
