Colin....autodarks are being used. The scope is a CDK14 and the guide star was mag 5.6. All drivers are up to date. This seems related to the...
Gents can you just confirm that the STX Guider does not require the DL Imaging driver, but is configured as 'Imagers Built in autoguider'...
Gents.....I can advise that after several weeks of use now, there is no advantage to using the SC3 in bin 3x3 or bin 4x4, which is very...
Hi Doug just noticed a potential problem with the shutter on the integrated guider of the FW8G. It appears that shutter cannot keep pace with the...
Thank you.
Hi Doug can you give me the specification for the 4 mounting holes on the AOX baseplate please? i.e the one you bolt to a filter wheel, or in my...
ok thanks. Looks like the default settings were enabled, so why is there a residual image in the darks? Do I simply increase the RBI flush value...
Doug I didnt realise the STX 16803 had an RBI issue. I imaged M42 last night followed by darks, and M42 was in the darks. I cannot seem to...
well, happened again tonight...I had the support guys focus the SC3 (having first focussed the scope), then I slew to the target, started to guide...
Doug The SC3 does not appear to be holding focus. Having focussed the telescope and then having focussed the SC3, its fine for a night or two,...
ok, thanks.
Doug.....when is the 64bit version of the ASCOM driver for the SC3 due. Trying to use the 64bit version of SkyX and of course it will not load...
and the sensor is 10 or 12bit?
thanks
yes, at 4x4 binning the image is very noisy so I am trying to stick with 3x3 binning when using the AO. However, I cannot achieve automation...
Supplemental question: When I bin the SC3 4x4 the DLImaging AO Control windows shows the following: SNR ~60 Total Counts - fluctuates around 200...
Colin does the SC3 feature a 0.7x reducer like the FW8G does? and can you confirm that the SC3 can be binned 4x4. The only reference to its...
Hi what would it take to develop an ASCOM driver for the SC3/AOX combination so that I can configure this in SkyX? There are functional issues...
Thanks Colin….all drivers/firmware correct. It was the power plug that was the issue.
Hi I am commissioning a new set up. The SC3 has been used for a while, the AOX, whilst new, has not been used until now. I can exercise the AOX...
Separate names with a comma.
