I forgot to upload my best image showing the effect.
Wow, lol. I don't know what to say other than these were 300s for the NGC target and 600s for M57. I did check a few more and some are messed up...
Colin, yes strange about the exposures times, 8.28 seconds. I checked a few other subs from the same night they are correct at 600s. No, not the...
Hi Colin, Version 6.21. This is the STT-3200, FW8S, SC 2, AO-8a. I see a recurring error in the logs "Api error(130) download requested but no...
The ghosting effect in the images, is this the RBI effect? I was ready to blame my green and blue filters but then I noticed the effect on my ha...
I am having a problem when using the autosave feature, on my first of a series my AO freezes, but not between frames. It doesn't stop the AO, the...
Certainly Colin. I am quite happy how it turned out. M16 doesn't get very high from the horizon here in Canada.
Imaged over four evenings this month, William Optics FLT132 0.72 reducer, AlumaU694 FW8G Astrodon filters. 27x300s Lum 18x300s ea RGB 15x600s Ha(5nm)
Kalpesh, If you have to make a custom adapter anyway, I would consider adding in a variable length adapter so fine tuning would be possible....
I am glad that I didn't have to get into that with the Meade ACF optics.
Colin, I have four of the adapter plates kicking around here, they have different coatings, some dull finish, some shiney. They range from 3.7 to...
Kalpesh, You must use an adapter on the filter wheel for a physical connection, otherwise it's just a big open hole. The adapters are 3.75mm...
Hello, I have the same setup as you, Aluma/FW8G/48mm adapter plate. All together your looking at about 57.5mm, about 2.5mm more than a standard...
Yes, your computer must be a 32 bit version.
I have a another question, can I have a pinout of the power supply port? I have a spare 2.1x5.5mm output socket on my cem120 saddle, I would like...
Hello, Just received my SC2 today, attached it to my STT-3200/FW8S/A0-8a no problems. Connected just fine in Maxim Dl. I noticed that binning...
I figured this out trial and error this afternoon William. I was able to calibrate successfully using Maxim Dl first, so I knew it could be done....
I'll try using Maxim Dl
Including the 600s sub Doug? If so for some reason image calibration that I use in Pixinsight isn't doing the job.
Sure Colin
Separate names with a comma.
