‘No... but it's impossible to know what is going on from that.” but the only thing that is moving while taking flats is the FW, tracking on the...
I do have a theory. The filters are not a snug fit but I do try to sit them centrally in the holder. Quite often though, especially before when...
I dont know yet. Tonight will tell as I take the first batch of flats and actually image then calibrate. The change in position of the vignetting...
Yes I agree. There was no slack evident anywhere.
Gents I have sent you a video containing flats taken through 6 filters. You can see the vignetting shifting about as the filter wheel rotates....
Tim As mentioned I have put the original AOX back on the scope and all is well - calibration and guiding performing as expected. so what are next...
I can certainly hear the clunking, but whether the carrousel actually stops moving after the final clunk is something I can observe when I remove...
You’re right, there isnt any room for maneuver there. I have been unsuccessful in being able to flat this out but the entire camera has been apart...
Hi Doug/Colin Returning to this problem - is it possible, as Colin suggested back in Aug, that the homing sensor is slightly offset with this...
I cant Tim, not at this point. I dont have long left at the obs so have put the original unit back on so that I can progress the work i have to...
AOX181201 Not using Maxim. Using SkyX and CCDOPS. Again, the only thing that has changed is the physical unit.
I cannot believe my luck. I am back in Chile, and brought with me the AOX I purchased from you a few months ago. I have not used it until now....
Ok, thanks Doug
I dont have any of those O-rings and my washers are all a tan-coloured flat nylon - and I dont have any washers that have a groove in them. I...
Well that is interesting. I do not have anything like that in this particular camera. Doug - can you please bring 2 complete sets for an FW8G...
Doug please take a look at the attached image. This the view down through the front of an AOX/FW8G. As you can see, part of the filters either...
Hi Colin can you please post a photo of the filter o-rings and washers showing the groove side that are currently used for the STXL-FW8G. Want to...
I got the carousel to move on power up, but only by 1 filter position. I did this by removing the pigtail and providing separate 12v power to the...
Ok, no internal cables are loose and all wires appear in tact. The carousel moves easily when the motor is pushed back and obviously is a little...
The other issue is that the filters being used are 1mm thick, so the clamp does not hold them in place - do you not supply plastic shims with the...
Separate names with a comma.
