I dont see any shim or shim sheet. It is from CCD since I rotated CCD 90 degree by changing the bolting direction of 3" accessory rings and...
Now I think I am facing the most difficult problem to solve, sensor tilt. Apparently the sensor is tilted - I tried a few test and confirmed...
It is wires. When sensor is extracted all the way out, wires get bent and get caught by the filter screws. I dont have any issue when in focus...
I will double confirm, but if I remember correctly, I did not feel anything when I touched the gear surface last night, so they should not.
Now one last problem (I hope) is that if I extract sensor all the way out (turn the sensor knob clockwise), the sensor assembly will interfere the...
Found the below information from PHD2 manual. Setting SGPro to remote guide head fixed the issue. Looks like PHD2 does not support remote guide...
If I understand correctly, PHD2 was trying to access "internal guider" which is not present in current 16200 model, so PHD2 can not access...
I used only one program -PHD2 - when trouble shooting. PHD could see main CCD and internal guider and connect either one, are you saying it was...
And is there any way for me to pinpoint the issue?
Colin, Thanks, but I have got more problem to sort out first. Doug, I tried guiding last night and this morning, but self guider did not pick...
Great! I can install it if it is simple.
I just received self guided filter wheel. However I am seeing a couple of issues already. First the locking screw is too short to lock the mirror...
That is very useful. Does 54mm number include T-thread or STL thread face plate?
I dont see back focus for Aluma camera in back focus table. Where can I find it? And does FW8-aluma take the same face plate (T-thread or STL) as...
I plan to use it on FSQ106ED F/5. Now the question is whether 72mm (scope side) to 3" (camera side) adapter will have vignette problem for self...
Gerat! What is the total backfous with OAG cover, with 3" thread adapter? Another question is whether 16200 use the same 12V car power adapter...
I have a STXL-16200 with regular (non self guiding) filter wheel. I am thinking to convert it to self-guiding by replacing the cover with this...
I have a working setup with my STF8300C and STF8300M, recently STF8300C stops working with unknown USB device ("device descriptor request...
Separate names with a comma.