Have painted a few internal surfaces flat black and was putting the whole thing back together and noticed "infinite" internal reflections in the...
So two more data points for what it is worth, I can bring the ghost images into focus so I measured the distance that the focuser needed to move...
The scope is an f/8 scope - I believe it to be well collimated, stars are round, checked with a Cheshire and a Howie Glatter laser collimator -...
OK definitely goes away with an open filter slot here are Blue and None, so I took the camera apart and verified the filter wheel screws where not...
I was able to put some extensions and get my telescope to focus down a long hallway and into my garage - the reflections appear to go away when...
LOL, Yeah - it would be cool if I had not been troubleshooting this for several weeks - I have flipped the filters so that the shiny side points...
There are no other optics (focal reducer) of any type in the path - the setup is the standard SBIG configuration with the FW8 plate attached...
All, I'm not sure exactly where to post this thread but since it concerns an STF-8300M with a FW8 and an OAG but this seems as good a place as...
no driver needed, also works plugged into USB 2.o or 3.0 on the computer side - I spent a lot of time trying to get the Raspberry Pi thing to work...
Funny, I also tried doing this with a Raspberry PI3, the USB and ethernet are not fast enough - my goal was reliably extending my USB interface....
I've had to make electronics work at very cold temperatures -my suggestion would be to adapt a dew heater to heat your STF-8300 - you could put...
V4.94 Build 1 is what is working for me now
I've been working on this for a bit SBIG STF-8300M, with filter wheel and ST-i OAG 8" Ritchey-Chretien on an iOptron IEQ45 pro mount 6.3 hours...
FYI Rolling back to older driver and this behavior went away
OK, I bypassed the hub and put in two different short USB cables and I ran the camera with CCDOps - all errors exactly the same, the log capture...
I captured a log file where the error reproduced itself - here is a a small sample of that file, these errors are consistent in the entire file...
I had the latest firmware and drivers before the update, so the previous version. I'm on travel but will attempt to capture in the log next...
One more potential clue related to the image download from the ST-i, while making new darks to eliminate the vertical streaking I observed that...
Something else I noticed, possibly related, since the new driver install my ST-i images have a vertical streak pattern, I'm wondering if some...
Some more information, I did some troubleshooting to try and isolate the problem. I configured CCDOps to gather focus frames from my STF-8300M...
Separate names with a comma.
