Kevin, if you really see the blank images from your tracking CCD, ie. all pixel values are zero, than there is high probability you have bad HDMI...
John, good your camera works, but please do not experiment with firmware changes, you have the right one in your camera. Also, power management...
I am in contact with Adam to kill this thread forever... Jan
Martin, I do not know what SB's CCDSOFT writes to your file as an observation date, maybe you didn't set it somewhere. Which image format did you...
Bill, Glad to hear it works now, but be aware, that the readout of the full ccd in bin 1x1 takes roughly 20 seconds. Jan
Bill, first of all, connect your PC and STT-8300 using USB and Ethernet cables. In the case of ethernet connection use your router and/or switch...
Doug, Thanks for explanation, I didn't know about this hardware limit. Jan
I have checked driver's value A few days ago and this is set to -50 C , but will check it once again a bit more carefully tomorrow. I will let you...
Dear Sun Gill Kwon, I got your email and will explore it. Then will come back to you with results. Thank you, Jan
Martin, thanks for log your file and images, but results are strange: 1) Every image taken with your tracking CCD is corrupted, namely mostly...
Martin, base on our private conversation today, please try to create a better log file which will contain one tracking CCD image, because your...
I see, you have very old DriverChecker64 application installed on your system. Please _download_ and _run_ a new SetupDriverChecker64 from SBIG...
The STL should have FW inside its body, so please try to create a log file instead of changing the camera. The log file could _possibly_ show us...
1) Which Windows OS do you use ? 2) Have you the latest Sbig driver installed on your system ? Try to download and run the latest...
Does your FW try to rotate when you select some filter wheel position ? Do you hear some noise without FW's movement ? Maybe, your blue strip is...
Mauro, the CCD setpoint of -50C is applicable to _all_ SBIG CCD cameras and their submodels. This temperature setpoint was set back from -35C to...
Marshall, The driver we use at least half a year or so allows you to set temperature setpoint to -50 C. Previously it was -35C. There may be some...
As you said, this shouldn't be appliction dependent, but I also do not believe this is a problem of SBIG driver. Maybe weather conditions, very...
Ken, Could you please specify which application do you use to control your st-10 camera? Also, you could try to catch this freezing in a log file,...
Giorgio, Thanks for detailed description of the problem. As seen, the firmware is not uploaded to your iMac with Yosemite probably due to needs...
Separate names with a comma.