I have requested the demo.
I did. They are up to date. Any idea why CCDOps falls over? OK I will download MaxIm DL and try that.
I have used both the Camera Add-on for The SkyX Professional and Sequence Generator Pro. As I mentioned I never had a problem with the SkyX and...
So after downloading the latest SBIG Driver Checker and updating all the drivers and firmware that I am aware of, I set up to take a dark image of...
What was the upshot of all this?
So I thought I would try connecting to the camera with CCDOps, to see what I can learn about settings and whether by default RBI pre-flash is one...
Hi Doug, I need your help again. I turned off the RBI pre-flash in Sequence Generator Pro.....or thought I had. However, the images I produced...
Round stars at last! I installed the Noctua fan in my SBIG 16803 by joining the red and black wires from the new fan to the clip connector of the...
Thanks Doug, I can assure you that I would rather not have to do this. But I don't have a camera that I can use at the moment and I think you'll...
Thanks Doug. So I can just cut the wire from the original fan with the connector that attaches to the camera, then attach the red and black wires...
Gentlemen, I bought a 12V Noctua fan of the same dimensions as the one that came with the camera (60mm x 25mm). It is reputedly very low noise and...
Thanks to you both for keeping me apprised. I understand the difficult situation with the pandemic. I am also going to buy a 12V ultra low noise/...
Guys, I still do not have a solution to producing images without star elongation due to the vibration of the fan. I understood you were going to...
Thanks Doug, that is most helpful.
Thanks Doug, that is what I thought. How will I know how bright I can have the stars in the image? Will the circular arcs be manifest if they are...
Thanks Doug, that's what I figured. Are you saying that if I turn the pre-flash function off altogether in SGPro, the problem will go away? The...
Hi Colin, Doug, As I await the water cooler for my camera, I continue to do trials to optimise my configuration and get set up to image with...
Thanks Doug, Would you say what I am seeing is abnormally bad? The Mount is a Paramount MX+, so pretty much a top end Mount. I am not aware of...
A comparison of magnified images of the stars at the centre of the FOV for Fan On vs Fan OFF Fan ON left, Fan OFF right [ATTACH] [ATTACH]...
SBIG 16803 Fan images, before and after replacement Previous Arrangement: The insulating foam pieces do not cover the entirety of the side of...
Separate names with a comma.
