Doug and Colin, I understand what you both are saying. When the moon is out I take images of it just for the fun of shooting the moon, and I have...
Attached are two images of the moon. I'm sure you will be able to tell which one has the 'Repaired' circuit board in it. Same STF8300m with...
Attached are two images. the first one is prior to the 'Repaired' STF8300m using a Astrodon Gen II HA filter, FLT132mm scope, and an exposure...
Repaired my STF8300m by replacing the board, SBIG Repair performed the repair, and now I'm no longer able to image the Moon. I used to be able to...
Attached is the 2x2 image of M-42 which shows a problem with the back-ground. I've contacted Bill in the California Repair Office and I'm sending...
Tonight's Imaging was going fine until the images started turning black. Temperature was 10C outside and my STF8300m was set to -10. Last good...
First looked at Device Manager and located the SBIG Device [ATTACH] Then went to update the driver, seems as though the computer lost its...
Colin, thanks for the response. It is the same laptop I've been using for a number of years Win 7 as the OS on a Dell Latitude E6510. Also...
I've been using CCDSoft and STF8300m with FW5-8300 filter wheel for a few years on my Win 7 machine I had no problem connecting to my SBIG STF...
Please find attached the 8 minute Dark, Bias Master, Flat, the 8 minute of the Leo Triplet. Of interest is M-65 in the Upper right part of the...
Using STF8300m with its 5 filter wheel, CCDSoft v5.00.217 to acquire images and CCDStack v2.90.5589.16047 to process the images. Lately I’ve been...
Purchased a STF 8300m many years ago and now the fan no longer works............ Can parts be purchased or must I send it in for repair? What do I...
I purchased the STF 8300m two years ago and now I'm getting weird artifacts in the images when size is increased by 200% in Photo Shop. An example...
Curious what a recommended Flat Image AU would be?? I've heard 50% of the well depth and I understand the Well Depth of the STF 8300m is 25,000....
Separate names with a comma.
