There may be a workaround if you don't mind playing with your Windows 7 64 bit installation, but first make sure you have the system backed up to...
Hi Mike. For the older USB cameras the SBIG driver checker download is here in the archive pages:...
Mike, Go to the cameras page of the Diffraction Ltd website, select your camera model and open the downloads tab, scroll down until you find the...
Joe, Looking at the fits header it states a simple auto dark was subtracted and that -100 was the correction to add for zero based ADU. What is...
How are you testing the camera Joe? When I look at your image in Fits Liberator and PixInsight using image analysis tools I see a 100% saturated...
Joe, Bit of a long shot but possibly one of the recent Windows updates has corrupted the camera driver, running the SBIG driver updater won't...
I think this is a wise precaution. If it may be of use I have attached a connection image for the ST8 with the CG5 and SXD, I believe you were...
It seems you are describing two separate problems and can you clarify the following: 1: With the camera powered on does the mount behave...
In that case, make up a small test cable and measure resistance, the camera guider port does not produce a voltage but rather closes a "relay"...
Sounds more likely you are using an ST4 cable with the wrong cable pinout sequence, there are two common variants of the cable, one version has...
The only other possibility I could think of is that the KAF 8300 is available from OnSemi in several versions with a plain glass cover slip, not...
Thanks Tim. Now you have explained it I can see that the "glass" part is the outer edge of the support and the inside edge is milled away over...
I know I said I wasn't going to muddy the waters any more, but you know how it is when dog gets a bone! Have you noticed anything else a bit...
It will be interesting to see the outcome Christopher. I dug out some of my old factory CCD notes this afternoon, they are a few years old now...
It had caught out a few of my field colleagues Colin. I have a medical engineers alert bulletin from a few years back advising us to check the...
Posted sectional and annotated view of Christopher's sensor image where I have added arrows pointing to what looks very much like the edge of a...
Doug. I beg to differ here, I had been working with OnSemi products for a number of years as an imaging engineer and OnSemi DO fit protective...
Bit of a long shot but in your image of the SBIG camera if I zoom in really close I can see what looks like a CCD shipping protective foil still...
64 bit Windows installer, ftp download here: (not http web page) ftp://ftp.sbig.com/pub/SetupDriverChecker64.exe
Probably not relevant but I notice in your uploaded bias images - fits headers - that cooling was off, temp reported was +7 deg, when Doug...
Separate names with a comma.
